IMPORTANT: This information is approved as part of the Product label. All instructions within this section must be read carefully in order to obtain safe and successful use of this product.

For standard seed treatment use; Agrichem Flowable Thiram should be applied evenly to the seed surface so as to achieve most satisfactory seed protection.

AS A SEED STEEP, Agrichem Flowable Thiram should be diluted in water so as to create a saturated solution (see rate of application). For optimum disease control seed should be steeped for 24 hours at a temperature of 30°C.

USE ON FOR THE CONTROL OF Beet seed (red, fodder and sugar) mangels. Phoma betae Carrot Stemphylium radicinum Alternaria daucii Celery, parsley Septoria apiicola Phoma spp

Seed should be thoroughly dried after steeping. It is recommended that the steep is used only once, and never more than twice.

Agrichem Flowable Thiram can be applied through most types of seed treatment machinery, from automated, continuous flow machines, to smaller batch treating apparatus. It is a ready to use, flowable formulation, but for more even application it is possible to dilute with up to an equal volume of water. The dilute solution should be prepared immediately prior to application, and gentle agitation maintained in the mixing tank. Once diluted with water the mixture must be agitated at frequent intervals until used up. Seed treated in this fashion may require drying.

Restrictions: Do not treat tomato (seed), pepper (seed) or aubergine (seed).

Seed to be treated should be of satisfactory quality and moisture content. Treated seed should not be stored from one season to another, and should be treated as near to drilling date as possible.

Agrichem Flowable Thiram should be applied to Soya bean seeds that are to be harvested as a mature pulse crop only. Evidence of effectiveness and crop safety on soya bean is limited.

Following crops: Any crop may be sown after a crop sown using seed treated with Agrichem Flowable Thiram.

---

Polymer Coating

Agrichem Flowable Thiram can be used in conjunction with SEPIRET polymer in a variety of colours to improve drill flow as well as improve seed coverage. For further details of the SEPIRET treatments for use in conventional machines or in specialist coaters, contact Agrichem at the address overleaf or your local representative.