HY-TL should be applied evenly for most satisfactory disease control.

HY-TL is a liquid seed treatment which can be easily applied through most specialist seed treatment machines. Agitate before use and continue during application. HY-TL can be applied neat, or diluted with up to an equal volume of water. Where required, dilution should be carried out immediately prior to application and the dilute solution MUST be agitated in the mixing drum during the treatment process. Owing to the excess water used, seed treated with diluted HY-TL may require drying. Once diluted with water the mixture cannot be stored. Make up only as much diluted product as can be used in a days work.

CALIBRATION: Should be carried out before the application of HY-TL or any other seed treatment product. If HY-TL is diluted before use the calibration must be adjusted to compensate for the increased volume.

For Continuous Flow Machines to apply 1.67 litres/tonne, first measure the seed throughput in tonnes/hour, then adjust pump to apply 28mls/minute of undiluted HY-TL for each tonne/hour.

For Batch Machines treating in 50kg lots, the pump should be adjusted to a throughput of 83.5mls of undiluted HY-TL per 50kg seed.

Seed must only be treated by means which incorporate engineering controls for worker protection together with a means of accurately dispensing the dose. Seed to be treated should be of satisfactory quality and moisture content. Treated seed should not be stored from one season to another, and should be treated as near to drilling date as possible.