Agrichem (International) Limited, Industrial Estate, Station Road, Whittlesey, Cambridgeshire, PE7 2EY, United Kingdom.
Telephone: +44 (0)1733 204019 Fax: +44 (0)1733 204162 Email: info@agrichem.co.uk Website: www.agrichem.co.uk
Telephone: +44 (0)1733 204019 Fax: +44 (0)1733 204162 Email: info@agrichem.co.uk Website: www.agrichem.co.uk
Newsletters
Seed Treatments
Polymer Coatings
Please Select
Herbicides
Please Select
Storage Products
Please SelectOther Products
Please Select
Seed Treatments
Prelude® 20LF
Application
Prelude 20LF should be applied evenly to ensure adequate control of seed-borne diseases.
It should always be used in conjunction with a SEED FLOW AID.
Prelude 20LF can be applied through most types of automated seed treatment machinery which are designed to apply liquids. It has a low electrical conductivity. Machines which depend on electrical conductivity to control application volumes should be carefully calibrated prior to treatment to ensure consistent results. Consult Agrichem, or your machinery supplier for further information.
Prelude 20LF should NOT be mixed with any other seed treatment products except on instruction by Agrichem, and should never be diluted with water.
In order to ensure free flowing seed through the seed drill Prelude 20LF should be used in conjunction with INERT SEED FLOW AID. This is best carried out in the seed plant during the treatment process, although it can be applied at any time prior to drilling.
For best distribution of the powder, apply using a powder applicator attachment on the seed treatment machine. It is however, possible to apply the powder to treated seed in the drill hopper. The application rate of SEED FLOW AID should NOT be exceeded as this may impede seed flow during drilling. SEPIRET POLYMER COATING may also be used with Prelude 20LF to aid drill flow. For further information on the supply and use of Sepiret, contact Agrichem or your seed supplier.
Machinery Cleaning Prelude 20LF is a solvent-based product. It is only partially miscible with water, therefore water should NOT be used to clean machines. Machinery should be thoroughly cleaned following treatment by flushing with methylated spirits, or another appropriate solvent such as isopropyl alcohol. A final rinse with water and detergent should be carried out before using any other treatment.
Seed treated with Prelude 20LF must be used within a season of treatment.
Prelude 20LF has been tested on a wide range of linseed and flax varieties. For further information and before the treatment of a new variety contact Agrichem (International) Limited via email on info@agrichem.co.uk or by telephone on 01733 204019. Do not treat the linseed varieties Abby, Agriace, Bolas, Karen, Laura, Linda, Mikael, Moonraker or Norlin.
It should always be used in conjunction with a SEED FLOW AID.
Prelude 20LF can be applied through most types of automated seed treatment machinery which are designed to apply liquids. It has a low electrical conductivity. Machines which depend on electrical conductivity to control application volumes should be carefully calibrated prior to treatment to ensure consistent results. Consult Agrichem, or your machinery supplier for further information.
Prelude 20LF should NOT be mixed with any other seed treatment products except on instruction by Agrichem, and should never be diluted with water.
In order to ensure free flowing seed through the seed drill Prelude 20LF should be used in conjunction with INERT SEED FLOW AID. This is best carried out in the seed plant during the treatment process, although it can be applied at any time prior to drilling.
For best distribution of the powder, apply using a powder applicator attachment on the seed treatment machine. It is however, possible to apply the powder to treated seed in the drill hopper. The application rate of SEED FLOW AID should NOT be exceeded as this may impede seed flow during drilling. SEPIRET POLYMER COATING may also be used with Prelude 20LF to aid drill flow. For further information on the supply and use of Sepiret, contact Agrichem or your seed supplier.
Machinery Cleaning Prelude 20LF is a solvent-based product. It is only partially miscible with water, therefore water should NOT be used to clean machines. Machinery should be thoroughly cleaned following treatment by flushing with methylated spirits, or another appropriate solvent such as isopropyl alcohol. A final rinse with water and detergent should be carried out before using any other treatment.
Seed treated with Prelude 20LF must be used within a season of treatment.
Prelude 20LF has been tested on a wide range of linseed and flax varieties. For further information and before the treatment of a new variety contact Agrichem (International) Limited via email on info@agrichem.co.uk or by telephone on 01733 204019. Do not treat the linseed varieties Abby, Agriace, Bolas, Karen, Laura, Linda, Mikael, Moonraker or Norlin.